Avery-dennison 9400 Series Programmer Manual Manual do Utilizador descarregar pdf (Página 15)

Cable Interface

The printer accepts standard RS-232C electrical signal

transmissions when it is connected to a DB-25S connector

configured as Data Terminal Equipment (DTE). For correct

operation, use all defined pins.

PC null modems

Plug the RS-232 cable into:

• A serial (RS-232) port on your host computer or

protocol converter

• The 25-pin RS-232 connector on your printer. See

"Installing the Printer" in your

Equipment Manual

The RS-232C cable interface is set up as a terminal device

(DTE):

Pin Description

3 Received Data

5 Clear to Send Input

6 Data Set Ready

2 Transmitted data

4 Request to send Output

20 Data Terminal Ready

1 Protective ground Ground

7 Signal ground

All other pins are open.

Communication

Requirements

3. Communication Requirements

3-5

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 105 106

Sem comentários

Avery-dennison 9400 Series Programmer Manual Manual do Utilizador Página 15