Avery Dennison Label Printer Manual de Instruções Página 23
- Página / 116
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Adjusting the Printhead Pressure Dials
The default setting is least pressure, which provides optimal printing in most cases. If
you see smudging, ribbon wrinkling, or poor print quality, you may need to adjust the
printhead pressure dials.
Inside Printhead
Pressure Dial
Outside Printhead
Pressure Dial
Th
e two dials are located on
either edge of the printhead
assembly (inside and
outside). The dials may be
set to different positions;
however, the inside dial
should be equal to or more
pressure than the outside
dial. Use a coin or flathead
screwdriver to adjust the
dials.
Each dial has four settings:
Least pressure
Light pressure
Medium pressure
Most pressure
Least
Pressure
Most Pressure
Use the following guidelines to adjust printhead pressure.
Supply/Ribbon Dial Settings
Increase both
dials one step, check print quality, repeat if
necessary.
Wide supply (> 2 inches)
Increase
inside dial one step, check print quality, repeat if
necessary. If uneven printing occurs you may need to increase
the outside dial.
Narrow supply (≤ 2 inches)
TUFF-MARK® wide (> 2 inches) Increase both dials to the most pressure setting.
TUFF-MARK® narrow
(≤ 2 inches)
Increase the inside dial to most pressure and the outside dial to
light pressure.
Print a test label to check the printhead pressure; make adjustments as necessary.
Loading Supplies 2-11
- Operator's Handbook 1
- TABLE OF CONTENTS 5
- TOC-iii 7
- GETTING STARTED 9
- Audience 10
- Using this Manual 10
- Getting Started 1-3 11
- Using the Control Panel 12
- Selecting a Function 12
- Exiting a Function 12
- LOADING SUPPLIES 13
- Loading Labels or Tags 14
- Loading Supplies 2-3 15
- Loading Supplies 2-5 17
- Exit Cover 18
- Peel Bar 18
- Platen Roller 18
- Lower Opening 18
- Peel Roller 18
- Loading Supplies 2-7 19
- Cut Liner Here 21
- Using the Optional Tear Bar 22
- LOADING RIBBON 25
- Loading Ribbon 26
- Loading Ribbon 3-3 27
- SETTING SUPPLY OPTIONS 29
- Setting the Supply Type 30
- Setting the Ribbon 31
- Using a High Energy Ribbon 32
- Setting the Speed 33
- Setting the Feed Mode 34
- Setting the Backfeed 35
- BACK 37
- CANCEL 38
- CHANGE CANCE 40
- 10 SET CANCEL 40
- CHANGE BACK 40
- Using Batch Separators 41
- Using Skip Index 42
- Using Rotate Image 43
- Setting the Print Contrast 44
- SETTING COMMUNICATIONS 45
- Setting the Baud Rate 46
- Setting the Word Length 47
- Setting the Stop Bits 48
- Setting the Parity 49
- Setting the Flow Control 50
- SETTING DEFAULTS 53
- Setting the Monetary Sign 54
- Setting the Secondary Sign 55
- CANCE 56
- CHANGE BACK 57
- SET CANCEL 57
- Setting Defaults 6-5 57
- Setting the Power-Up Mode 58
- Changing the Prompt Set 59
- Setting the Numeric Format 60
- Using Flash Storage 61
- Using Flash Memory 62
- SELECT BACK 63
- ENTER BACK 63
- Setting Defaults 6-11 63
- Setting the Image Error Mode 65
- CANCEL 66
- Setting the Error Retry Mode 67
- Memory Guidelines 68
- USING SCRIPTS 69
- Viewing Script Information 70
- Downloading a Script 71
- Enabling a Script 72
- Deleting a Script 73
- Enabling Status Polling 74
- Using Immediate Commands 75
- SETTING RFID OPTIONS 77
- Using RFID Supplies 78
- Using the RFID Setup Menu 78
- Setting the Error Action 81
- PRINTING 83
- Printing a Test Label 84
- On-Demand Mode Printing 84
- Pausing a Batch 85
- Restarting a Batch 85
- Canceling a Paused Batch 85
- Canceling a All Batches 86
- Repeating a Batch 86
- Printing TrueType® Fonts 87
- Licensing Your Fonts 87
- CARE & MAINTENANCE 89
- Cleaning 90
- Care & Maintenance 10-3 91
- Replacing the Printhead 92
- Care & Maintenance 10-5 93
- Factory Set Password 95
- ENTER BACK 96
- Checking Supply Quality 97
- Using Password Protection 98
- Service Diagnostics 98
- Troubleshooting 99
- Error Messages 100
- Common Errors 100
- SPECIFICATIONS 103
- Supplies 104
- Ribbon Specification 104
- Cable Pinouts 105
- ACCESSORIES & OPTIONS 107
- GLOSSARY 109
- G-2 Glossary 110
- Index I-1 111
- I-2 Index 112
- Index I-3 113
- 28028 28028 116
Manuais e produtos relacionados com Impressoras de rótulos Avery Dennison Label Printer
(11 páginas)
(46 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.070 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais