Avery Dennison Label Printer Manual de Instruções Página 66

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 65
Setting the Configuration Packet Mode
You can set how the printer responds to online configuration packets. You can ignore all
online configuration packets by enabling this option. Ignoring these packets is useful
when you cannot change your host’s data or when you want the printer to operate as
specified through the printer’s menu.
Note: We recommend changing your host’s data stream, but if that is not possible,
enable this option.
Use caution if ignoring online configuration packets, because the printer may
need the configuration for proper operation.
To change the setting, from the Main Menu, select Setup, then Defaults. Then, follow
these steps.
1. Press or until you see Ignore Config.
CHANGE BACK
Disable
Ignore Config.
DEFAULTS
2. Press CH
ANGE to highlight the ignore configuration options. The current setting is
shown.
3. Press or to scroll through the ignore configuration options.
SET CANCEL
Disablee
Ignore Config.
DEFAULTS
4. W
hen you see the ignore configuration mode you need, press SET to save the change.
Press CANCEL to leave the image error mode unchanged.
Ignore Config.
Disable
CHANGE BACK
DEFAULTS
5. Press BA
CK until you return to the Home/Online screen.
6-14 Operator's Handbook
Vista de página 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 115 116

Comentários a estes Manuais

Sem comentários